SM-100 DATA SHEET

각종 부품의 주형용수지로 특히 밧데리 극표시용으로 사용된다

PROPERTIES

1. Good Adhesion and acid-resistant Molding.
   
2. Inorganic, Organics Metal Adhesion
   
3. Good Adhesion of Plastic PVC, ABS, PC, Rubber
   

APPLICATION

1. Adhesive for ABS Battery Case Molding.

General Properties

Test Temperature: 20°C, Humidity: 65％

Specification	Resin	Hardener
Specific Gravity	1.15 ± 0.05	1.00 ± 0.05
Viscosity 25°C (CPS)	1,800 - 2,200	150 - 250
Color (Gardner)	All color	4.0 MAX
Pot Life	At Room Temperature 25 min
Mixing Ratio (wt%)	R : H = 100 : 40 (WT)
Curing Condition	At Room Temperature 24hr or 60°CX 1hr

Physical & Electrical Properties

Specification	Unit	Result	Test Method
Tensile Strength	Kg / cm2	350-450	-
Flexural Strength	Kg / cm2	900-1,000	-
Compressive Strength	Kg / cm2	750-850	-
Impact Strength	Kg·cm/cm2	3.5-4.5	Charpy
Tensile Adhesion Strength	Kg / cm2	ABS : 30-40	-
ARC Resistance	Sec	65∼75	-
Dielectric Break Down Voltage	KV / mm	14∼16	-
Tg	°C	90	-
Hardness	Shore D	83-84	-
Water Absorption	％	0.15	-
Low Temperature Resistance	°C	-30	-